Spectra Watermakers LB-20000, Installation And Operating Manual

Page: 54 / 65

54
Spectra Connect Settings
Your new Spectra Connect is designed to make your watermaker easier than ever to
operate, maintain and enjoy. This section will guide you through some of the more ad-
vanced settings options available.
Always use caution when changing any factory default settings, as serious dam-
age can occur.
The Spectra Connect automatically monitors the operation of the system to ensure a
long and trouble-free service life. If an operating parameter changes, the Connect can
switch operating modes, shut itself down, or automatically store itself in order to protect
your watermaker.
It includes advanced calibration sequences to make proper setup and maintenance of
your watermaker easier than ever.
The onboard clock feature allows for temporary power interruptions without detrimental
effects on the system. In some cases your watermaker will continue to function in its
last known operating state.
The Spectra Connect has built in data logging, allowing for easy access to historical
operating data—which can indicate a wearing component or spares to be carried along
before a failure occurs.
Built in warnings for preventative maintenance automatically alert a user of pending
maintenance items, helping to keep your watermaker’s up-time to 100%! Advance
warnings are pre-programmed for Prefilter Life, Pump rebuilds, membranes, Z-Ion re-
actor rod life, and carbon filter life. These warnings are resettable, allowing you to per-
form the maintenance before a catastrophic failure, then reset the interval—so you’re
always on top of the maintenance cycle!
Access the Data Log file
Obtain the Spectra Connect IP address, as shown earlier in this manual
Using an internet browser on a Smart Phone, Tablet or Laptop type the address below:
<
Device IP Address >/dataviz.php
Ex: 192.168.0.1/dataviz.php