Spectra Watermakers Bimini 300, Installation And Operating Manual

Page: 11 / 78

11
Unpack the system and inspect it for damage during shipping. Freight damage must be report-
ed to the carrier within 24 hours.
Refer to the shipping list for your system to ensure you received all of the components listed.
Do not discard any packaging until you have found and identified all of the parts. The small
installation parts are listed on the kit list.
Warning! We will not be held responsible for shortages that are not reported within thirty
days of the ship date.
Study the system layout diagram, component photos, and descriptions before beginning in-
stallation.
Lay out the system. Before starting the installation identify where each module and compo-
nent will be placed. Ensure that there is enough clearance around the components for remov-
al of filters and system service. Make sure you have adequate tubing and hose before starting.
Additional parts may be ordered.
Getting Started
Bimini 300 Shipping List:
•
Bimini Feed Pump Module
•
10% Clark Pump and Reverse Osmosis Membrane Module
•
Boost Pump and Sea Strainer Module
•
Fresh Water Flush Module or Z - Ion
•
Service Kit
•
3/4 - inch Black Spiral Suction Hose (25 feet)
•
5/8 - inch Vinyl Hose (25 feet)
•
3/4 - inch Vinyl Hose (10 feet)
•
1/2 - inch Vinyl Hose (25 feet) fitted with Quick Connect Fitting on
one end, and John Guest stem fitting on the other end.
•
1/4 - inch Black Product Tubing (25’)