Specialized Stumpjumper FSR, User Manual, Page: 20 / 28

17
6. INTERNAL ROUTING (ALLOY FRAME)
6.1. DROPPER SEATPOST
To simplify assembly, always install the seatpost housing before the shift and brake housings.
1
„
Remove the plastic shift/brake port behind the bottom bracket before routing the seatpost housing through the
frame.
Before removing the shift/brake port from behind the bottom bracket, the chainstay must be
removed from the front triangle. Be sure to follow the pivot assembly instructions (section 4.5)
about cleaning and applying threadlocker to the threads.
2
„
Install a section of shift housing starting at the head tube, then route it into the down tube until it exits slightly out
the port behind the bottom bracket.
„
With the end of the housing protruding around the edge of the bottom bracket port, install a “Churro” foam
sleeve over the housing and guide it up into the down tube, while curving the housing up and into the seat tube
until it exits the top of the seat tube.
„
Once the housing exits the top of the seat tube, install the seatpost according to the manufacturer’s instructions.
„
Install the port cover, then assemble the rear triangle to the front triangle and torque the bolts to specifications.
Follow the assembly order and torque specs as shown in section 4.4 ( page 6 ) and 4.5 ( page 7 ).
FOAM
SLEEVE