Specialized Stumpjumper FSR, User Manual, Page: 19 / 28

16
7
PRESS
ONTO
THREADS
„
Push the tube back in until it is flush with the exit port, then install a set screw until it is also flush with the exit port.
„
Repeat the process for the shift tube.
„
After the set screws are installed, place the punch inside each tube and use the punch to press the tube down on
the set screw (see inset).
8
„
Install the brake and shift housings according to the brake and shift manufacturer’s instructions.
„
Position the seatstay brake housing clip so that it is perpendicular to the tube and the housing is above/in front of
the bolt. Ensure that the housing has a natural loop (curvature) between the seatstay and chainstay.