Specialized Stumpjumper FSR, User Manual, Page: 13 / 28

10
6. SEATSTAY @ LINK
6
„
Grease, then place the two outer dropout spacers against the link bearings (tapered surface against bearing).
„
AIign the seatstay tabs with the link pivot bearings and spacers, then insert the pivot bolts.
7. MAIN (BOTTOM BRACKET)
7
„
Guide the housing tubes through the rubber boot and routing port behind the main pivot according to the internal
cable routing instructions (section 5.2, page 13 ).
„
Grease, then place the main pivot spacers against the main pivot bearings (tapered surface against bearing).