Specialized Stumpjumper FSR, User Manual, Page: 12 / 28

9
4. EXTENSION @ LINK
4
„
Align the extension with the bearings, then insert the pivot bolts.
5. HORST LINK (DROPOUT)
5
CARBON FRAME: Ensure the housing guide tubes are installed in the chainstay before assembling
the rear triangle to the frame. Refer to section 5.2, page 13 for internal cable routing instructions.
„
Grease, then place all the outer Horst spacers against the Horst bearings (tapered surface against bearing).
„
AIign the drive-side and non-drive side Horst pivot assemblies, then insert the pivot bolts.