Operating instructions BMK-20i | Heinz Soyer Bolzenschweißtechnik
53
How to retrofit the PH-2L and PH-4L stud welding guns to drawn arc stud welding with
ceramic ferrule
Step 6:
3. Insert a weld stud.
4. Insert the ceramic ferrule support and
check the stud protrusion.
The stud / stud flange must protrude
approx. 3 mm from the ceramic ferrule.
If necessary, correct the setting of the
stud chuck by shifting the ceramic ferrule
support.
Step 7:
Fasten the ceramic ferrule support by
means of the Allen screws of the gun.
Step 8:
Check whether the stud is centrically
aligned in the ceramic ferrule grip. The
stud must not tilt during the "lifting
movement".
The stud must not touch the ceramic
ferrule.
Step 9:
If necessary, correct the position of the
ceramic ferrule grip by shifting the foot
plate.
1. Loosen both fastening screws of the
foot plate.
2. Align the foot plate so that the stud is
centred in the ceramic ferrule and
does not touch the ceramic ferrule.
3. Then tighten both fastening screws of
the foot plate.
The adjustment is complete.
Summary of Contents for SRM EcoWeld BMK-20i
Page 2: ......