Operating instructions BMK-20i | Heinz Soyer Bolzenschweißtechnik
45
How to retrofit the PH-2L and PH-4L stud welding guns to SRM Technology
®
How to retrofit the PH-2L and PH-4L stud welding guns to a support with SRM
Technology
®
Step 1:
Switch off the stud welding device when the gun is connected to
it.
Step 2:
Set the stud chuck to the desired stud
(see chapter “7.1.1 Setting the
Step 3:
If the gun is equipped with a support,
remove it if need be. To this end, loosen
the two Allen screws.
It is not essential to remove the
support, however, this makes use
easier.
Step 4:
Undo the union nut.
Step 5:
If there is still a stud chuck in the gun, remove it.
Step 6:
Select a suitable stud chuck according to
the stud dimension.
Slide the stud chuck up to the stop into
the adapter sleeve.
Step 7:
Hand-tighten the union nut.
Summary of Contents for SRM EcoWeld BMK-20i
Page 2: ......