16
Operating instructions BMK-20i | Heinz Soyer Bolzenschweißtechnik
2.5
Intended use of the stud welding device
Pins and threaded studs from M3 - M16 made of steel and stainless steel can be welded
using the SOYER
®
BMK-20i stud welding device (M16 preferred with SOYER
®
HZ-1
weld studs and SRM Technology
®
).
Special studs or diameters on request.
The stud welding device must only be operated with the welding guns described in
chapter
“6.5 Permitted welding guns” on page 27.
The stud welding device must be operated within the technical specifications.
Only welding studs according to DIN EN ISO 13918 and SOYER
®
standard may be
welded.
The stud welding device supports the following welding processes:
SRM
®
welding (stud welding in a radially symmetrical magnetic field)
Drawn arc stud welding with inert gas
Drawn arc stud welding with ceramic ferrules
Incorrect use
Any use of the device deviating from the intended use is considered improper use.
Improper use, unauthorised modification or manipulation of the device will void the
declaration of conformity and all warranty claims against the manufacturer.
2.6
Intended use of the stud welding guns
With the SOYER
®
stud welding guns described in these operating instructions, pins and
threaded studs from M3 to M16 as well as many different weld fasteners made of steel
and stainless steel can be welded according to the DIN EN ISO 13918 and SOYER
®
standards.
The maximum diameter and type of weldable studs can be limited by the
performance capacity of the stud welding device on which the gun is operated.
Special studs or diameters on request.
The operation of welding guns is only permitted with the stud welding devices described
in the technical data of the gun.
The stud welding gun must be operated within the technical specifications.
Summary of Contents for SRM EcoWeld BMK-20i
Page 2: ......