Soyer SRM EcoWeld BMK-20i, Operating Instructions Manual, Page: 14 / 80

14 Operating instructions BMK-20i | Heinz Soyer Bolzenschweißtechnik
2.3 Safety instructions for the working method
Hazards due to incorrect working method
Hazards for operators and third parties can arise due to an incorrect working method.

Ensure sufficient stability and a dry installation location for the device.

Make sure you do not knock over the device or pull it down from its position
with the gun cables.

Make sure, especially with mobile use, of your own good stability during
welding.

Do not hold the workpiece in your hands during welding. The workpiece must
be securely fixed during the welding process.

Never wrap the gun lines around parts of your body (e.g. arm) as electric
fields can occur.

If the gun is not positioned properly or the gun settings are incorrect, a flash
can occur during welding. Do not look directly into the flash.

The gun carries out lifting movements during the welding process. Do not
hold the gun tight in the area of moving parts.