South Bend Tools
South Bend Tools
-8-
For Machines Mfd. Since 7/19
Model SB1065F–SB1071F
I N T R O D U C T I O N
A. Compound Rest Handcrank:
Moves tool
toward and away from workpiece at preset
angle of compound rest.
B. 4-Way Tool Post Lock Lever:
Mounts up
to four cutting tools at once that can be
individually rotated and indexed to the
workpiece, then locked in place with lever.
C. Compound Thumb Lock:
One of two thumb
locks that help hold slide in place and
improve rigidity of cut.
D. Compound Locking Capscrews:
One of four
cap screws that hold compound at angled
positions indicated by rosette scale.
E. Compound Rosette:
The scale indicates at
which angle compound is set to move.
Figure 9. Compound rest and tool holder.
Figure 9. Compound rest and tool holder.
A
A
B
B
C
C
D
D
E
E
Compound Rest & Tool Holder
Tailstock
A. Quill:
An MT#6 Morse taper, metric a
nd inch
scale, and a drift slot to remove tight-fitting
tooling are used.
B. Quill Lock Lever:
This lever secures quill in
position and ensures rigidity.
C. Tailstock Lock Nuts:
Two lock nuts at the end
of studs secure tailstock in position along
bedway by pulling upward on locking plates
underneath the ways.
D. Tailstock Hi-Lo Lever:
This lever allows for
1:1 movement between handwheel and quill.
When lever is in gear reduction position,
handwheel operation is made easier for large
diameter end drilling operations.
E. Tailstock Handwheel:
A cast-iron handwheel
moves quill toward or away from spindle.
Figure 10 Tailstock controls.
Figure 10 Tailstock controls.
A
A
B
B
D
D
C
C
E
E
Summary of Contents for Oil Country Series
Page 65: ...South Bend Tools...
Page 66: ......
