South Bend Tools
South Bend Tools
-24-
For Machines Mfd. Since 7/19
Model SB1065F–SB1071F
P R E P A R A T I O N
8.
Rotate spindle speed range hub to 20, 85,
500 range, as shown in Figure 22.
Note:
You may need to rock spindle back and
forth by hand to mesh gears.
Figure 22. Spindle speed range hub.
Figure 22. Spindle speed range hub.
9.
Move headstock range lever (see Figure 23)
to L position. By doing so, 20 RPM shown on
spindle speed range dial will be selected.
10.
To ensure carriage or cross slide do not
unexpectedly move during test run, pull up
on half nut and power feed ON/OFF levers
(see Figure 24).
11.
Unlock carriage lock and use carriage
handwheel to move carriage back and forth
to ensure it is disengaged from leadscrew
and feed rod.
Figure 23. Headstock range lever.
Figure 23. Headstock range lever.
20
20
RPM
RPM
12.
Move feed direction lever (see Figure 25) to
N
(neutral position), to disengage gearbox
and apron from headstock operations.
Figure 25. Feed direction lever.
Figure 25. Feed direction lever.
13.
If not already done so; connect lathe to power
supply (refer to Power Connection on
Page 21).
14.
Turn ON power supply to lathe, and turn
ON master power switch on lathe electrical
box.
Figure 24. Power feed and half nut levers.
Figure 24. Power feed and half nut levers.
Summary of Contents for Oil Country Series
Page 65: ...South Bend Tools...
Page 66: ......
