South Bend Tools
South Bend Tools
For Machines Mfd. Since 7/19
Model SB1065F–SB1071F
-25-
P R E P A R A T I O N
19.
Observe direction of chuck rotation; it should
match direction printed on control panel.
— If spindle rotates in opposite direction,
lathe is out of phase. To correct, swap
positions of power supply wires L1 and L3
shown in Figure 19 on Page 22.
20.
Observe lathe and listen for any abnormal
noises or vibration. The lathe should run
smoothly.
21.
On carriage control panel, push
EMERGENCY STOP button to stop lathe.
— If lathe does not stop, turn the main
power switch OFF, and refer to
Troubleshooting on Page 60 for
correction before proceeding.
22.
Reset EMERGENCY STOP button and
restart lathe.
23.
On headstock control panel, push
EMERGENCY STOP button, and lathe
should again stop.
— If lathe does not stop, turn the main
power switch OFF, and refer to
Troubleshooting on Page 60 for
correction before proceeding.
24.
On carriage control panel, turn Spindle
Rotation switch for reverse rotation.
25.
Reset EMERGENCY STOP buttons and
restart lathe.
26.
Observe direction of chuck rotation; it should
now match reverse direction printed on
control panel.
27.
On carriage control panel, push Spindle OFF
button and spindle should stop.
28.
Restart lathe and press foot brake; spindle
should come to a quick stop.
29.
On both control panels, press Jog button to
bump spindle.
30.
Restart lathe and press foot brake; lathe
should quickly stop.
15.
On both headstock and carriage control
panels (see Figures 26–27), rotate
EMERGENCY STOP buttons clockwise to
verify that they are in popped-out position.
16.
On headstock control panel, turn power
switch ON (see Figure 26).
Figure 26. Headstock control panel.
Figure 26. Headstock control panel.
EMERGENCY
EMERGENCY
STOP
STOP
17.
On carriage control panel, turn Spindle
Rotation switch to left for normal rotation
(see Figure 27).
18.
On carriage control panel, push green
Spindle ON button (see Figure 27).
Figure 27. Carriage control panel.
Figure 27. Carriage control panel.
EMERGENCY
EMERGENCY
STOP
STOP
Spindle Rotation
Spindle Rotation
Switch
Switch
Spindle OFF Button
Spindle OFF Button
Spindle ON Button
Spindle ON Button
Summary of Contents for Oil Country Series
Page 65: ...South Bend Tools...
Page 66: ......
