27
Paper feed
The , switch, which is a blue key located in the left upper part of the
printer body, is the Paper feed control. Press this key 3 times after the
test is finished and before cutting the paper, in order to visualize the last
lines.
This printer uses 37mm-wide thermal paper, which comes in a 33mm-
diammeter reel. The figure shown below indicates how to put the paper.
Press the key , (until the paper appears). To remove the old paper reel,
cut the paper next to it and press the key . The removal used-reel
operation must be carried out in this way due to the fact that the paper
movement is in one-way only, that is, the paper can be moved in one
direction only.
ATTENTION:
Don’t pull the paper, always use the Paper feed key. Never try to put
the paper back into the printer. In any of these cases, the printer can be easily
damaged.
9. Technical specifications
Summary of Contents for MD-5060 Series
Page 24: ...26 8 Printer Printing sample...
Page 32: ...34 NOTES...
