24
The equipment has an RS232 output
in the control panel that can be used
to register measurements in a serial printer or data collector. The outputs
are the following ones: Pin 2: Rx ; Pin 3: Tx ; Pin 5: Gnd;
Transfer data to a computer
To transfer data from the
MD-5060x
to a PC-type computer, use the cable
provided with the accessories. Connect it to RS232 PORT, and the
opposite end of your PC RS232 connector.
Open Windows: Start > Programs > Accessories > Communications >
Hyper Terminal, as shown in the figure below:
To set up a new connection, enter a name
and then select an icon. In this example,
the name chosen was “MOTOR”. Click
OK.
Summary of Contents for MD-5060 Series
Page 24: ...26 8 Printer Printing sample...
Page 32: ...34 NOTES...
