Source Audio Collider Delay+Reverb, User Manual, Page: 8 / 51

SA263
Collider Delay+Reverb Owner’s Manual
8
Power and Control Connections
DC 9V (Power)
Connect to the included 9 Volt DC power supply. If you would like to use a 3
rd
-party supply, the
power supply must be regulated at 9 Volts DC (direct current), able to source at least 300 mA
(milliamps) of current, and the plug should have a tip-negative, barrel-positive polarity.
USB
Connect to your computer (Mac or Windows) to the
Collider’s
USB port (denoted by the icon) using a
standard mini USB cable. The Collider is a class compliant USB device, meaning that it does not
require any custom drivers. For more information about the
Collider’s
USB capabilities, refer to the
USB Section
of the User’s Guide.
Control Input
The 3.5 mm C
ONTROL
I
NPUT
port connects to external control devices such as the Source Audio Tap
Tempo Switch, Source Audio Dual Expression Pedal, Neuro Hub, and Hot Hand Motion Controller. For
more information, refer to the
Expression Pedal Input , Hot Hand Input , and Neuro Hub sections of
the User’s Guide.
Expression/Switch Pedal Input
The P
EDAL
I
N
jack on the back panel connects to either an external passive expression pedal or
footswitch. The P
EDAL
I
N
S
WITCH
allows the user to select which type of external controller is being
used. Set to EXP for expression control or SWITCH for footswitch control. See the External Control
section for details.