SA263
Collider Delay+Reverb Owner’s Manual
17
Reverb On/Off LED
The ON/OFF LED above the R
EVERB
F
OOTSWITCH
indicates if the reverb effect is active (lit red) or
bypassed (not lit). This LED also blinks while using the Reverb Hold function.
Reverb Hold Function with Dual Processor Architecture
One of the great advantages of the Collider Delay+Reve
rb’s dual p
rocessor architecture is the
opportunity it offers to the Hold function. The Hold function
sustains any Reverb engine’s
wet signal
indefinitely while pressing down on the REVERB footswitch. As with most effects units that offer
some type of a H
old (a.k.a. “Freeze”) function, it is
also possible to continue playing over the top of
the sustained reverb tail. Collider provides the exciting new functionality of being able to play with
delay engaged while holding the reverb trail…all in one pedal.
Control Input Button
This small button located at the top of the pedal is used when configuring external control. It also
plays a role in many of the Hardware Shortcuts. See the
External Control
section and the
External Control LED
The small LED located to the left of the M
IX
K
NOB
is the C
ONTROL
/ACTIVITY
L
ED
. When lit, it indicates
that external control mode (expression or MIDI) is active or that incoming data is being received via
MIDI or a Neuro connection. For more information, see the
External Control
section.