SA263
Collider Delay+Reverb Owner’s Manual
39
•
Kill Dry Mode
: Completely eliminates the dry signal from the peda
l’s output. Kill Dry Mode is
helpful when using the Collider in an effects send.
•
Knob Action after
: Allows you to select the function of the knobs after a preset is selected.
There are three different options:
Always Write
–
Knob positions will be recalled as exactly how they are set on the
pedal
Show Preset Value
–
This is the default mode. Discover where the knobs are set in
each preset by rotating them. The Control LED will flash when each knob position has
been discovered.
Write After Preset Value is Reached
–
Rotating the knob will initially discover its
position within the preset, but once it has been discovered, the Control LED will
blink, and the knob will begin writing a new position.
•
Ext. Footswitch
: P
lug a standard ¼” TRS, one or two button external footswitch to the
Collider’s
PEDAL IN jack and use it as an external Tap Tempo or to externally scroll through
user presets.. These two dropdown menus select the control assignments for each button on
a two-button switch (Use the top field when only when connected to a single button switch).
There are three choices: Tap Tempo, Increment Preset, and Decrement Preset
•
Power Up State:
Selects between engaging or bypassing the effect upon the initial power up
of the pedal. You may also decide to engage one effect by default, and bypass the other.
•
Default I/O
: Sets the default I/O signal routing mode. Descriptions of the available routing
modes are available in the
Stereo Operation & Signal Routing
•
Keep Delay Time Constant with Preset Change
: Does exactly what it says
–
change presets
without changing the time of the delay.
•
Enable Tap Tempo on DELAY/TAP Footswitch
: Check or uncheck this box to turn off or
enable the DELAY/TAP footswitches Tap Tempo functionality.
•
Tap Tempo Toggle Left
: Select between different beat divisions to map to the left position of
the tap tempo switch.
•
Tap Tempo (Toggle Center
): Select between different beat divisions to map to the center
position of the tap tempo switch.
•
Tap Tempo Toggle Right:
Select between different beat divisions to map to the right position
of the tap tempo switch.
•
Delay Bypass Hold:
This dropdown menu allows you to extend the amount of time required
when holding down the DELAY/TAP footswitch to bypass the delay effect. Extending the
Delay Bypass Hold time also affects the action of the tap tempo and makes the pedal less
likely to bypass while tapping in a tempo.
•
Enable DELAY/TAP Footswitch Preset Decrement Function:
Check or uncheck this box to
turn of or enable the DELAY/TAP footswit
ch’s ability to scroll through presets.
•
Enable REVERB Footswitch Preset Increment Function:
Check or uncheck this box to turn of
or enable the REVERB footswitch’s ability to scroll through presets.
•
Recall Effect On/Off States on Preset Increment/Decrement:
Checking this box allows you to
include the On/Off states of both the Delay and Reverb effects when scrolling through
presets.
•
Pedal Input & Control Input Calibration
(
Accessible via the Show Expression Pedal
Calibration dropdown controls
): In the vast majority of cases, it is not necessary to change