Sound Devices PIX 260i User Manual Download Page 84

Page: 84 / 97

PIX 260i User Guide

v. 2.10

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

tup Menu Op

tions

Network

Parameter Name

Description

Options

This PIX’s Name

Sets name of PIX 260i. This must be unique within a

network.

» PIX260

Grouping

Sub-menu for network grouping settings.

2.1

Network Group

Groups with other PIX 250i, PIX 260i, PIX 270i, and

970 units on the network.

» No Group

•  Group 1
•  Group 2
•  Group 3
•  Group 4

2.2

Push Settings to Group

Copies this unit’s settings to all other units in the

group. All grouped settings will be pushed. (

See

“Grouped Settings”, page 47

)

2.3

Synchronize audio channel

settings

Dante Redundancy Mode

When On the PIX 260i’s Primary and Secondary

Ethernet ports both transmit Dante Audio over sepa-

rate networks. This provides a fail safe of the Dante

system if one of the networks should fail.

In Dante

Redundancy Mode, two separate networks
must be run and they CANNOT be connect-
ed to one another. Connect any computer
running Dante Controller to the PIX 260’s
PRI Ethernet network.

» Off

• On

Auto IP Settings

When On, the IP settings will automatically be pro-

vided by a DHCP (recommended), or Link-local when

no DHCP is present. When Off the IP Address, Subnet

Mask, and Gateway will have to be entered manually.

• Off

» On

IP Address

Displays IP Address, can be edited when Auto IP

Settings is OFF.

Subnet Mask

Displays Subnet Mask, can be edited when Auto IP

Settings is OFF.

Gateway

Displays Gateway, can be edited when Auto IP Set-

tings is OFF.

Authentication

Set the user name and password to be used for

PIXNET and Samba drive access.

System

Parameter Name

Description

Options

Power

Determines power on and off method. When set to

Always on, the PIX 260i will turn on and off when

external DC is applied. When Use Power Switch is

selected the PIX 260i is powered on and off using a

key combination of AUDIO + Control Knob press.

• Always On

» Use Power Switch

Initial View

Sets which one of three screens will appear after the

unit boots up.

» Main View (video)

• AudioView (with Input Settings)
• Audio View (with expanded

meters)

HP Warning Bell Level

Adjusts the level of the heaphone warning bell sound

» -40dBFS

(Off, -60 to -12dBFS)

Time Zone

Selects the international time zone

» (GMT-06:00) Central Time (US)

(All GMT zones)

Daylight Saving

Toggles daylight saving on or off for the time-of-day

clock

» Off

• On

Summary of Contents for PIX 260i


































































































Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands

Sound Devices PIX 260i, User Manual

Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands