Sound Devices PIX 260i User Manual Download

Page: 77 / 97

PIX 260i User Guide

tup Menu Op

tions

Parameter Name

Description

Options

QuickTime File Split Every

Choose the maximum file recording time. When set

time is exceeded a new .mov file is created automati-

cally. Since ProRes and DNxHD codecs are variable

bit rate, the file size of each file will vary, even though

the running time will be the same. (Maximum file time

is approximately 10 hours for 30fps video and less,

and approximately 6 hours for 50fps video or more).

•  1 min
•  5 min
•  10 min
•  15 min
•  30 min
•  1 hour
•  2 hours
•  3 hours

» 10 hours

Wave File Split Every

Choose the file size limit of .wav files. When the limit

is reached, the PIX 260i will create a new .wav file

(labeled sequentially) and continue recording.

• 2 GB

» 4 GB

File Name Format

The format for file names as they are written to the

drive.

» Drive-Reel-Clip

•  Reel-Clip
•  CamID-Reel-Clip
•  Reel-Scene-Take
•  Scene-Take
•  RED File Format
•  Arri File Format

File Name Prefix

Text to be placed before all other charac-

ters in each file name. PIX Name is set in

[Network - This PIX’s Name]

• Off

» PIX Name

CamID

An identifying character for a camera

» A

(single alpha to “Z”).

Reel

Current Reel number. When the Reel number is

altered, the Clip number is reset to 1

• 1
(numeric)

Clip

Current Clip number. When the Reel number is

altered, the Clip number is reset to 1

» 1

(numeric)

Scene/Shot

Current Scene name. When the Scene name is

altered, the Take number is reset to 1.

» “Scene 1”

(multi alphanumeric)

Take

Current take number. When the Scene name is

altered, the Take number is reset to 1.

» 1

(numeric)

Scene Increment Mode

The method used to increment the Scene/Shot value

when Stop+Fast Forward is pressed on the Main View.

• Disabled

» Numeric

• Character

Erase/Reformat

Format any or all attached drives. When all is se-

lected, all drives will share the same volume label but

each drive name will be suffixed with a unique drive

number.

•  Erase/Re-format: Drive 1
•  Erase/Re-format: Drive 2
•  Erase/Re-format: Drive 3
•  Erase/Re-format: Drive 4
•  Erase/Re-format: All drives

Video

Parameter Name

Description

Options

Video Input

Physical source to derive recorded video from.

• HDMI

» SDI

Summary of Contents for PIX 260i


































































































Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands

Sound Devices PIX 260i, User Manual

Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands