Sound Devices PIX 260i User Manual Download

Page: 95 / 97

PIX 260i User Guide

ranty & T

hnical Suppor

Warranty and Technical Support

Warranty & Service

Sound Devices, LLC warrants the PIX 260i Video Recorder against defects in materials and work-

manship for a period of TWO (2) years from date of original retail purchase.

This is a non-transferable warranty that extends only to the original purchaser. Sound Devices, LLC

will repair or replace the product at its discretion at no charge. Warranty claims due to severe service

conditions will be addressed on an individual basis.

THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. SOUND DEVICES,

LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRAN-

TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUEN-

TIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LE-

GAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth above,

they may not apply in all cases.

For all service, including warranty repair, please contact Sound Devices for an RMA (return mer-

chandise authorization) before sending your unit in for repair. Product returned without an RMA

number may experience delays in repair. When sending a unit for repair, please do not include ac-

cessories, including SSD/HDD, CF cards, batteries, power supplies, carry cases, cables, or adapters

unless instructed by Sound Devices.

Sound Devices, LLC

Service Repair RMA #XXXXX

E7556 State Road 23 and 33

Reedsburg, WI 53959 USA

telephone: (608) 524-0625

Technical Support / Bug Reports

For technical support and bug reporting on all Sound Devices products contact:

Sound Devices, LLC

E-mail:

[email protected]

web:

www.sounddevices.com/support/

Telephone: +1 (608) 524-0625 / Toll-Free in the U.S.A.: (800) 505-0625

Fax: +1 (608) 524-0655

Sound Devices hosts a user support forum. The URL is:

http://forum.sounddevices.com

Sound Devices cannot guarantee that a given computer, software, or operating system configuration can
be used satisfactorily with the PIX 260i Video Recorder based exclusively on the fact that it meets our
minimum system requirements.

Summary of Contents for PIX 260i


































































































Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands

Sound Devices PIX 260i, User Manual

Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands