PIX 260i User Guide
77
Se
tup Menu Op
tions
#
Parameter Name
Description
Options
9
Time/date
Display of time of day and date
» On
• Off
10
Timecode
Display of current timecode value
» On
• Off
11
Drive (D1) status
Display status of Drive 1
» On
• Off
12
Drive (D2) status
Display status of Drive 2
» On
• Off
13
Drive (D3) status
Display status of Drive 3
» On
• Off
14
Drive (D4) status
Display status of Drive 4
» On
• Off
15
RS-422 Status
Display status of connected RS-422 controller
» On
• Off
16
Cue Marker
Display cue marker information during playback
» On
• Off
17
Sync Reference
Display current Sync Reference
» On
• Off
18
Group Number
Displays
[Network - Group]
setting
» On
• Off
19
IP Address
Displays current PIX 260i IP Address
» On
• Off
Remote Control
#
Parameter Name
Description
Options
1
RS-422
Enable or disable RS-422 capability
• On
» Off
2
RS422 Interface Device ID
Set the DeviceID communicated to attached RS422
controllers.
» Sony BVW75
• Sound Devices
3
Rec Start/Stop
Determines what method the PIX 260i uses to auto-
matically start and stop recordings.
» Off
• SDI Flag - RED
• SDI Flag - Panasonic
• SDI Flag - Panasonic (Varicam)
• SDI Flag - Canon
• SDI Flag - Sony
• SDI Flag - Arri
• SDI Flag - PIX
• Timecode
4
GPIO Inputs
Set GPIO inputs (pins 1, 2, and 3 on GPIO connector)
to active high or active low. Active high: Connecting
the pin to +5V will activate the function. Active low:
Connecting the pin to ground will activate the function.
» Active low
• Active high
5
GPIO Outputs
Set GPIO outputs (pins 6, 7, and 8 on GPIO connec-
tor) to active high or active low. Active high: When the
function is true, +5V will appear on the pin. Active low:
When the function is true, the pin will be grounded.
• Active low
» Active high