Sound Devices PIX 260i User Manual Download Page 44

Page: 44 / 97

PIX 260i User Guide

v. 2.10

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Pla
ybac

It is recommended that files in the same Play List or reel be of the same resolution, frame rate, and codec.

Playback Rate of Audio Files

Audio files (WAV) are always played back at the sample rate of the PIX 260i. The sample rate that

the file was originally recorded at (and that is stamped in the file’s header) will be ignored by PIX

260i during playback, and the PIX 260i will play the file at the current sample rate, as determined

by Setup Menu option

[Timecode/Sync - Sync Ref - Audio Only Mode]

. When Setup Menu option

[Timecode/Sync - Sync Ref - Audio Only Mode]

is set to

Internal

, audio files will play back at the

sample rate of Setup Menu option

[Audio - Audio Mode Sample Rate]

, even in Video Mode.

Non-Native File Playback

The PIX 260i can playback QuickTime .mov files and PCM .wav files generated by third party ap-

plications and devices.

Exporting QuickTime Files for 260i Playback

When exporting QuickTime files for PIX 260i playback be sure to set audio to 48kHz. The PIX 260i

cannot playback more than two QuickTime tracks of audio. If multi-channel audio is required, it is

recommended that the multi-channel audio is interleaved into a single QuickTime audio track.

Playing Back Files on a Computer

Video files recorded with the Apple ProRes codec require QuickTime to be installed. QuickTime can

be downloaded from

http://www.apple.com/quicktime/download/

. See

http://software.sounddevices.com/

Apple_ProRes_White_Paper_July_2009.pdf

for more detailed information about the ProRes codec.

Video files recorded with the Avid DNxHD codec require DNxHD drivers to be installed. Visit

http://

www.avid.com/dnxhd

to download DNxHD drivers, and for more detailed information about the

DNxHD codec.

Audio files are industry standard .wav files that adhere to the Broadcast Wave File standard (BWF).

Each file includes the original broadcast extension (bext) and a complete iXML section. Sound De-

vices Wave Agent software is a free, powerful tool for working with Broadcast WAV Files. See

www.

waveagent.com

Summary of Contents for PIX 260i


































































































Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands

Sound Devices PIX 260i, User Manual

Search results

Summary of Contents for PIX 260i

Reviews:

Related manuals for PIX 260i

Brands by name

Popular brands