background image

Camera

Power on/off

Vehicle DVR

Camera

Displayer

(optional)

2 Channel H.264 FULL HD 1080P

Mobile DVR for Motorcycle

Quick User Manual

Attention

H12AE58G00

● CAM1 indication light: as red light, 

if light off, no cameras detected. 

     If light in flashing, it starts recording. In rapid flashing as triggered 
     for recording instant events.

● CAM2 indication light: as red light,

 if light off, no cameras detected. 

     If light in flashing, it starts recording. In rapid flashing as triggered 
     for recording instant events.

● WiFi indication light: as blue light.

 Light off as no WiFi dongle detected. 

     Light on as connecting to WiFi.

● REC indicator: as Red light.

 Light off as 1 CH or 2 CH camera undetected. 

     In flashing as in recording. In rapid flashing, as events trigger recording. 

● WiFi indicator: as blue light.

 Light off as WiFi dongle undetected. 

     Light on as connecting to WiFi.

Device boots after power on and wait approx. 20-30 sec. Red light will constantly 

bright after power on, and then system starts to record when REC red light 

is flashing. 

For ensure recording system working correctly, please play and 

check storage files on PC regularly.

 Installation on motorcycle ( For example)

Appearance

Light signal

Viewer

*Notes:
(A) To do this, the software should be installed DirectX 9.0 or above.
(B) Support OS: WINDOWS 7,8,10, does not support MAC OS
(C) The recommended hardware requirements: i3 above grade 2.7GHZ, 
      RAM: 4G or more, more preferably independent display card

Installation diagram

DVR installation diagram

2. Shut off/Stop recording

The DVR will keep recording 3 seconds after power off, at this point, system will 

write the buffer back to Micro SD card. In addition, after all light turn off, user can 

remove Micro SD card and get all video files from it. 

1. Boot / Recording

CAM1

CAM2

Close

Minimal

Playback

Calendar

Backup

Snapshot

Configuration

Format

G-Sensor

Compass

Google Map / File list

Speed display

Play speed

Play speed

Operation control 
interface

Volume control

WiFi Connection

VACRON MOTO 
for IOS

VACRON MOTO 
for android

Method 1: Connect DVR with 
battery, and then sets ON/OFF 
switch. The DVR use independent 
power supply.

Method 2: DVR connect with 
motorcycle power supply (ACC ON), 
the DVR will be activated when 
motorcycle engine is on.

Red cable: DC cable

Black cable: Ground cable

2CH

DVR

2CH DVR

Full HD Camera

DC

10V~15.6V

-20~55°C

super-

capacitor

DC5V

car cam

1/2.7” CMOS

LENS

3.3 mm

110

˚

Full

HD

Full

HD

OBD (On-board display unit)

MIC

optional

optional

Micro

※Memory card is excluded, please purchase it separately.

Standard Set: 
1. Camera*2
2. Camera extended cable 2 meter*1pc + 1 meter*1pc
3. Power cable
4. USB  WIF dongle
5. Velcro
6. Quick guide manual 

Product Accessories

Optional:
1. 8/16/32G/64G/128G Class10 above Micro SD card
2. OBD (On-board Display unit) 

DVR

Full HD camera

DVR host

OBD (optional)

DVR cables

Micro SD card insert

Record

WiFi

Microphone receiver

Host Indicator

Display signal indicator

Method 1

Method 2

ACC ON/OFF

OBD

(On-board display unit)

(optional)

WIFI

CAM2

CAM1

1

2

1

4

5

(1)OBD cable connector
(2)WiFi dongle connector
(3)Camera 1 cable connector
(4)Camera 2 cable connector
(5)Power cable connector

Reviews: