Sound Devices 744T User Manual Download

Page: 80 / 90

744T User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Setup Name

Setup Description

Setup Options

Power: Power-up Messages

Enables or disables the notifications that appear

upon boot up (daily folder prompt, output attenu-

ation notice, and set time and date message).

Disabling these messages is useful when using the

External Power Functions to power on and start

recording.

• Disabled

• Enabled

Ext Keyboard: Assign

Enter to setup keyboard shortcuts when using the

CL-1 keyboard interface

Ext Keyboard: Language

Select the language of the keyboard attached to

the CL-1.

• English

• German

• French

CL-1: Re-program

The CL-1 has its own firmware which is sup-

plied from the 744T. This utility updates the CL-1

firmware.

CL-1: Logic Out Assign

Each logic output pin can be assigned to go high

when the unit is in the selected mode. Logic input

overrides logic output selection.

• Undefined

• Stop

• Play

• Pause

• Record

Info: Button Shortcuts

An informative menu showing the available key-

board shortcuts.

Info: Version

Shows the hardware revision, serial number, and

firmware version of the unit.

Update Software

Upgrade tool used to apply new firmware. It will

search all connected storage for the firmware file

and prompt to update.

Setup Menu Shortcuts

The setup menu can quickly be navigated by using the Rotary Switch to scroll up and down through

the menu. Additionally, shortcuts, or “bread crumbs” can be placed on often-used menu items. A

bread crumb is set by holding the play key. A small dot is shown to the left of the setup number. Any

number of bread crumbs can be set, but their utility is reduced with too many applied.

toggles among menu bread

crumbs to higher numbered

items

with no bread crumbs placed,

moves to the next general

menu section

press and hold to set or remove a menu crumb;

single press navigates to menu item #1

toggles among menu bread

crumbs to lower numbered

items

with no bread crumbs placed,

moves to a previous general

menu section

Summary of Contents for 744T



























































































Search results

Summary of Contents for 744T

Reviews:

Related manuals for 744T

Brands by name

Popular brands

Sound Devices 744T, User Manual

Search results

Summary of Contents for 744T

Reviews:

Related manuals for 744T

Brands by name

Popular brands