Sound Devices 744T, User Manual

Page: 75 / 90

69
# Setup Name Setup Description Setup Options
27
28
Input 1, 2: Source
Input 3, 4: Source
Forces the inputs to analog or digital mode. Default
is auto-select.
• Auto-select
• Analog
• Digital (S/PDIF/AES)
• Disabled (Power Save)
29 Input 1,2: Linking, MS Selects whether the input 1 & 2 levels are con-
trolled independently or grouped as a pair with or
without mid-side decoding.
• Unlinked
Inputs 1 and 2 operate independently
• Linked 1/2
Inputs are linked, channel 1 pot controls level, chan-
nel 2 pot controls pan
• Linked 1/2 and MS
Inputs are linked, channel. 1 pot controls level,
channel. 2 pot controls pan and are decoded for MS
stereo.
30
Line Input 1,2: Gain Control
When inputs 1 and 2 are in LINE input mode,
selects whether the gain setting is controlled by
the front panel knobs or by the menu sensitivity
settings below.
• Use front panel knobs
• Use sensitivity settings
31
32
33
34
Line Input 1: Gain
Line Input 2: Gain
Line Input 3: Gain
Line Input 4: Gain
Adjusts the input sensitivity of line-level inputs
when set to Use Sensitivity Settings.
Adjustable from -6 dB to +18 dB in 0.1 dB steps.
35
36
37
38
Input 1: Delay
Input 2: Delay
Input 3: Delay
Input 4: Delay
Sets a digital delay for each input. Can be used to
compensate for delay in various digital wireless
microphone units or digital processors.
0 to 30 milliseconds, 0.1 mS increments
0 mS to 30,000 mS up to 48.048 kHz Fs
0 mS to 15,000 mS up to 96.096 kHz Fs
0 mS to 7,500 mS up to 192 kHz Fs
39
File: Marker Mode
Enables the user to set cue points on the fly while
recording by pressing the record key.
• Markers disabled
No cue marks are set.
• New Cue
Cue markers will be set within one contiguous file.
• New File
A new file is started with each press of the record
key, the take counter is increased by one.
40 File: Max Size Selects the file size where the 744T will close,
then start a new file. The 744T will not record a file
larger than the selected size.
The largest file permissible with the 744T’s FAT32
file system is 4 GB
• 4 GB CF (3.6 GB)
• 2 GB CF (1.8 GB)
• 1 GB CF (950 MB)
• 512MB CF (450 MB)
41 File: Folder Options Allows user to organize files in root and sub-
folders. To not use any folders select <None> on
every level.
• TOP-LEVEL
• MID-LEVEL
• BOTTOM-LEVEL <None>, <Add new entry>
<None>,<Add new entry>, <Daily>
<None>, <Add new entry>, <Scene>
42 File: View Files Enters the file directory tree for the selected drive. Highlight media descriptor to navigate the menu
43
File: View Take List
Allows user to view the last 200 takes. Takes can
be selected and converted to circle takes.
• Circle
44 File: Copy Files Allows the user to select a file or a range of files to
be copied from one storage media to another. Files
will only be copied from their current directory to
a directory of the same name on the other media.
If a file will not fit on the destination media, user
is given the option to skip that file and continue
with the copy or abort the copy all together. User is
advised at the end of the copy process how many
files were copied successfully.
• Copy all {drive}
Þ
{drive}
• Last 24 hr {drive}
Þ
{drive}
• Last 48 hr {drive}
Þ
{drive}
• Flagged {drive}
Þ
{drive}
All files, when recorded, automatically have their flag
bit set to “on”
45
File: Copy Flag Reset
Selects whether the flag bit is cleared or not on
files copied from one media to another.
• Disabled
• Enabled