manualshive.com logo in svg

Sound Devices 744T, User Manual

Share
Download
Sound Devices 744T User Manual Download Page 62

744T User Guide and Technical Information 

56

v. 2.67 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

File Transfer Using FireWire 

FireWire port

FireWire cable - 744T to computer

 

The 744T’s FireWire (IEEE-1394) port makes transfering of recorded files to a computer quick and 

easy. When connected to a computer, the internal hard drive and CompactFlash card of the 744T will 

mount to a Mac OS X or Windows computer as a local, removable mass storage volume. Using Mac 

Finder, Windows Explorer, or any other file utility, files can be copied, read, and deleted directly to 

and from the 744T hard drive. 

It is best practice to copy original audio files from the original recorded medium to another volume before 
editing. 

To mount the 744T to a computer via FireWire: 

1.  Stop all playback and recording activity. 

2.   Interconnect the 744T to a FireWire-enabled computer using an appropriate FireWire cable. No drivers 

are required if the computer meets the requirements listed in Specifications.

3.  Make certain that within the 

FIREWIRE: CONNECTION

 Setup Menu item 

COMPUTER/CONNECT 

has been 

selected.  

4.   The 744T will now show the screen below when successfully connected via FireWire. When connected, 

all audio functionality of the 744T is defeated.  

 

5.   Navigate the drives on the computer and copy all needed audio to local storage.

To avoid possible directory corruption on the 744T hard drive, always properly dismount the unit 
from the operating system. On Mac platforms, drag the drive icons to the trash. On Windows plat-
forms, use the “Disconnect External Media” icon in the system tray. 

Summary of Contents for 744T



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands