manualshive.com logo in svg

Sound Devices 744T, User Manual

The Sound Devices 744T offers exceptional audio quality and versatility, making it an ideal choice for professional sound recording. Ensure maximum utilization with a comprehensive User Manual, readily available for free download at manualshive.com. This invaluable resource provides detailed instructions on operating and optimizing the 744T, empowering users to create superior recordings with ease.

Share
Download
background image

 

v

Quick Start Guide    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1

Powering the Unit 
Menu Navigation Basics 
Connecting Audio Sources 
Routing Inputs to Tracks 
Selecting Recording Parameters and File Destination 
Time Code Setup 
Recording 
Playback 
FireWire File Transfer to Computer 

Front Panel Descriptions    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Panel Lock 

LCD Display Descriptions    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
Left Panel Connectors and Controls     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
Right Panel Connectors and Controls    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
Back Panel Descriptions    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
Input Setup and Control   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12

Input Source Selection 
Analog Inputs 1 and 2 
Input Linking (Stereo or MS Decoding) 
Analog Inputs 3 & 4 
Digital Inputs – AES3 
Digital Inputs – AES3id (S/PDIF) 
Signal Presence and Peak Indicator 
Input Delay 

Input-to-Track Routing    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16

Selective Input Muting 

Sampling Rate and Bit Depth     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17

Sampling Rate 
Bit Depths 

Word Clock    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

Clock Master 
Clock Slave 
Multi-Unit Linking Via C. Link 

Outputs – Analog and Digital     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 20

Master Output Bus 
Output Bus 2 

Headphone Output    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 22

Selecting Headphone Sources 
Setting Headphone Source Options 
MS Stereo Monitoring 
SoundField B-Format Surround Monitoring 
Rotary Switch Behavior 
Headphone Favorite Selection 
Headphone Playback Mode 
Headphone Warning Tones 

Metering and Display    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26

Output Meter 
Meter Ballistics 
Peak LEDs 
Tone Oscillator 
LCD Contrast & Backlight, LED Brightness 
LCD Gain Display
Record Indication 

Time Code    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 29

Frame Rate 
F Sampling Rate Modes 
Time Code Modes 
Time Code Hold Off
Jam Menu 
User Bits 
NTSC Standard Def Video Production 

Recording    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 34

Recording 
Pre-Record Buffer 
Failure During Recording 
Record Pause
Record Timer

Playback     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 36

AutoPlay 

Audio File Formats    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 37

.WAV 

.FLAC
.MP2 
.MP3
iXML 

Recording Time Calculation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 39

Uncompressed Recording Time in Track-Hours 
MP3 Compressed Record Time in Hours 

File Naming / Numbering    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 41

Scene Name/Numbering 
Mono Track Name Designators 
Duplicate File Names 

Wave Agent Beta   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 43
File Management     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 44

Folder Actions 
File Viewer Navigation 
File Viewer Screen 
File Time and Date 
File Size Maximum 
Setting/Clearing Flag Bits 
Automatic Flag Clearing 
File Copying Among Available Drives 
File Deletion 
False Take Control 
Emptying the Trash and False Take Folders 
Take Number Incrementing 
Take List 
Take Status

Storage Medium – Internal Hard Drive    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 50

Formatting 
Drive Type 
Drive Replacement 
Drive Failure 

Storage Medium – Removable CompactFlash   .  .  .  .  .  .  .  .  .  . 53

When to Use CF 
Formatting 
Speed Testing 
Qualified CF Cards 

Storage Medium – External FireWire Drives  .  .  .  .  .  .  .  .  .  .  .  . 54

When to Use External FireWire Drives 
Formatting 
FireWire Bus Powering 
Qualified Drives 
DVD-RAM Drives 

File Transfer Using FireWire     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 56
Powering    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 57

Lithium Ion Rechargeable Battery 
External Powering and Battery Charging 
Time Code Clock Battery 
Auto Functions with External Powering 
Power-up Messages
Power Consumption Variables 

Firmware Upgrades    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 60

Version Information 
Upgrading Firmware 

CL-1 Remote Control and Keyboard Interface   .  .  .  .  .  .  .  .  .  . 61

Connecting the CL-1 
Logic Inputs
Logic Outputs

Setup Menu Presets    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 64

Built-In Presets 
User Setup Data File 

Setup Menu    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 67

Setup Menu Shortcuts 

Front Panel Button Shortcuts    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 75
Connector Pin Assignments    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 76
Specifications    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 77
Accessories     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 79
CE Declaration of Conformity    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 81
Software License    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 82
Warranty and Technical Support   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 83

Table of Contents 

Summary of Contents for 744T



























































































Reviews:

No comments

Related manuals for 744T

X-Rite 891 Operation Manual preview
891
Brand: X-Rite Pages: 80
E Instruments 1500 Quick Manual preview
1500
Brand: E Instruments Pages: 2
DAE Polaris 1000 User Manual preview
Polaris 1000
Brand: DAE Pages: 28
E+E Elektronik EE772 Manual preview
EE772
Brand: E+E Elektronik Pages: 32
Watts HF Scientific AccUView LED Ex Quick Start Manual preview
HF Scientific AccUView LED Ex
Brand: Watts Pages: 2
Hanna Instruments HI 84430 Instruction Manual preview
HI 84430
Brand: Hanna Instruments Pages: 25
AquaMaster Combo meter P700 Pro User Manual preview
Combo meter P700 Pro
Brand: AquaMaster Pages: 20
LaserLiner 4K5 RA 800 Manual preview
4K5 RA 800
Brand: LaserLiner Pages: 52
Endress+Hauser 11362Z Safety Instructions preview
11362Z
Brand: Endress+Hauser Pages: 24
R&S DVMS1 Getting Started preview
DVMS1
Brand: R&S Pages: 60
Dranetz PowerGuide 4400 User Manual preview
PowerGuide 4400
Brand: Dranetz Pages: 277
INTERSPIRO Divator Pro User Manual preview
Divator Pro
Brand: INTERSPIRO Pages: 76
Net2Edge LIB-304 Installation Manual preview
LIB-304
Brand: Net2Edge Pages: 37
Kurz 504FTB Installation Manual preview
504FTB
Brand: Kurz Pages: 17
TCS QWL4.1 Installation Manual preview
QWL4.1
Brand: TCS Pages: 45
SPX RADIODETECTION 6100 Series Important Safety Instructions Manual preview
RADIODETECTION 6100 Series
Brand: SPX Pages: 6
R&S EDS300 Getting Started preview
EDS300
Brand: R&S Pages: 43
Vanguard Instruments ATRT-03 Software Operating Manual preview
ATRT-03
Brand: Vanguard Instruments Pages: 47

Brands by name

Popular brands

Load more brands