manualshive.com logo in svg

Sound Devices 744T, User Manual

Share
Download
Sound Devices 744T User Manual Download Page 34

744T User Guide and Technical Information 

28

v. 2.67 

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

signal. Changes to tone oscillator settings made while tone is latched on do not take affect until tone 

is turned off. 

To record tone at the head of a take, activate the tone signal then press the REC key. From the factory, 

subsequent presses of the TONE key are locked out to prevent tone from being inadvertently record-

ed. Tone can be activated while recording by following these steps.

1.  Enter the Setup Menu option 

FILE: MARKER MODE 

and set it to disabled. 

2.  Press the REC key to begin the recording. 

3.  To record tone, Press and hold down the REC key then press the TONE key. To latch tone, press and 

hold the Tone key for 2 seconds, press again to release. Once tone is generated the REC key can be 

released.

The tone oscillator can be activated anytime during recording by setting the 

TONE: RECORD LOCK

 

feature in the Setup Menu. Press the Tone key anytime to generate a tone signal. Please note that 

when enabled, any slight press of the tone key will generate tone and 

override

 any program material 

where tone has been routed to, including record tracks. 

LCD Contrast & Backlight, LED Brightness 

LCD contrast is setup menu controlled. From the factory the contrast is set to 50%, suitable for most 

viewing conditions. Contrast can be increased or decreased. 

The front panel 

 key toggles the LCD and key backlight. Backlighting is suitable in low or no 

ambient light situations. 

LED brightness is continuously adjustable from low to high. Hold down the 

 key, then turn the  

Rotary Controller to change brightness levels. The brightness of all LED’s is adjusted. In stealth 

mode (Setup Menu selected) the LEDs are toggled on and off with the LCD backlight key. 

LCD Gain Display

By default, the 744T displays the set Bit Depth and Sampling Rate in the right-hand side of the Main 

LCD Display. The gain level for inputs 1 and 2 temporarily override the Bit Depth and Sampling 

Rate display while the input gain pots are in use. The LCD display can be set to always display gain 

by selecting Gain Only in the Setup Menu option 

LCD: GAIN DISPLAY

. 

Record Indication 

The position of the A-time numbers and time code numbers can be exchanged in the setup menu. 

When 

BIG TIME CODE

 is selected in the menu the time code is displayed in the main numeric dis-

play. If time code is turned off A-time is shown as large numbers, even with 

BIG TIME CODE

 set. 

To provide for additional visual indication that recording is in process the big numerals can be set to 

reverse contrast or to flash during record. This is menu-selected. 

reversed numbers indicating that recording is active

Summary of Contents for 744T



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands