Sound Devices 744T User Manual Download

Page: 66 / 90

744T User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Firmware Upgrades

The 744T uses upgradable EEPROM (electrically erasable programmable read-only memory) to hold

the unit’s operating system software, or firmware. Firmware is the source code which controls all

aspects of the device, including: menu options, signal routing, signal processing, LED’s, button and

switches, and data ports.

Version Information

During manufacturing the unit’s hardware revision number and serial number are burned into

a protected area of the EEPROM and are not changeable. These numbers can be viewed from the

INFO:VERSION

selection of the setup menu.

INFO:VERSION

also shows the firmware version of the

recorder.

The current firmware revision number is also displayed on the bottom right-hand corner of the

Sound Devices splash screen at boot up (v2.65+). The 744T firmware version and unit serial numbers

are written to the data chunk of every WAV audio file generated by the 744T.

Upgrading Firmware

From time to time Sound Devices may issue revisions (new versions) of firmware for the 744T. Firm-

ware is user-upgradeable. To upgrade firmware follow the steps below.

Download the firmware file from the Sound Devices web site.

Transfer the firmware file (it will be named

VERSION _ NUMBER.PRG

) to the 744T internal hard drive via

FireWire or onto a CF card. If there are multiple firmware files on the media, the 744T will indicate the

firmware file listed to apply. To prevent confusion, ensure that there is only one firmware file available

on either 744T media.

Enter the firmware upgrade menu. You will be prompted to search for the firmware file. If a valid

firmware file is present on either the internal hard drive or CF the recorder will prompt if the path is

the proper file to use. Press the Rotary Switch or the tone key to say yes. The 744T will begin firmware

upgrade and validation. Progress is indicated with a bar graph.

When the upgrade and verify process is complete, power cycle the 744T. On power-up the LCD will

turn solid black and the green LED next to the FireWire port will blink 20 times. When the update se-

quence is complete, the 744T will reboot once again.

Verify the firmware version using the

INFO:VERSION

menu.

Reset the time-of-day clock, time code generator, and verify any recording parameters.

7. It is best practice to download the latest user guide from the Sound Devices web site, since the changes

to functionality are documented.

Summary of Contents for 744T



























































































Search results

Summary of Contents for 744T

Reviews:

Related manuals for 744T

Brands by name

Popular brands

Sound Devices 744T, User Manual

Search results

Summary of Contents for 744T

Reviews:

Related manuals for 744T

Brands by name

Popular brands