manualshive.com logo in svg

Sound Devices 744T, User Manual

Share
Download
Sound Devices 744T User Manual Download Page 7

 

1

Quick Start Guide 

The 744T is an extremely powerful and flexible portable audio recorder. Before recording, please 

familiarize yourself with the product. Several settings should be verified or set based on individual 

recording needs. 

Powering the Unit 

1.

   Apply power to the unit by attaching the (included) removable, rechargeable Li-ion (lithium ion) bat-

tery to the back panel battery mount. The metal tabs on the mount line up with the electrical contacts 

on the battery. From the factory, the battery may not have a charge, so external DC may be needed for 

initial operation and charging. Connect the included AC-to-DC power adapter to the DC input plug to 

power and charge the battery. 

2.

   Press and hold the power key to turn on the unit. Press and hold the power key to turn off the unit. 

If this is the first time the recorder has been powered, or if it has been without a battery for an ex-

tended period, the date and time may need to be set. 

Charge the included Li-ion battery for 6 hours prior to initial use. 

Menu Navigation Basics 

The setup menu provides options for recording, routing, and control parameters. The single layer 

menu structure allows for very quick navigation and selection of functions. To enter the setup menu 
press the front panel 

 key. Once in the setup menu, the following conventions are shared for 

navigating among selections and to select specific parameters. 

•  

 - enters setup menu 

•  

‡

ITEM

†

 - highlighted menu item 

•  

4

 - selects highlighted item or parameter 

•    - moves up in menu and between menu parameters 

•    - moves down in menu and between menu parameters 

•  

8

 - exits the selected menu or menu altogether 

•  The 

 stop key will exit from any menu and cancel any changes. Use it to escape out of the 

setup menus. 

The right panel Rotary Switch (labeled “Select”) is a convenient control to quickly navigate among 

menu items and item options. Its push-to-select function duplicates the check mark in most menus. 

Connecting Audio Sources 

1.

   Connect audio sources, either analog or digital, to the appropriate input connector. 

2.

   When using either input XLR, set the appropriate input level—mic, line, or digital—with the adjacent 

slide switch. 

3.

   If mic-level inputs are used on XLR input 1 or XLR input 2, make certain that phantom power, input 

limiters, and high-pass filters are activated as required. 

4.

   When using inputs 3 or 4, set gain levels in the setup menu. 

Summary of Contents for 744T



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands