Sound Devices 722 User Manual Download Page 67

Page: 67 / 80

722 User Guide and Technical Information

Setup Name

Setup Description

Setup Options

HP: Favorite Mode

Selects the audio source monitored when the Rotary

Switch is pressed during recording or playback.

Inputs 1,2

Tracks A,B

Monitor A,B

Input 1,1

Input 2,2

Track A,A

Track B,B

Monitor A,A

Monitor B,B

Inputs 1,2 (MS)

Tracks A,B (MS)

Monitor A,B (MS)

Inputs 1+2,1+2

Tracks A+B,A+B

HP: Playback Mode

Selects the audio source sent to headphones upon

playback.

• No change

• Same as options listed above

HP: Warning Bell Level

Set the output level of the multi-function warning bell.

Off,

60 to –12 dBFS in 1 dB steps

HP: Rec/Stop Bell

Alerts the user with one beep at the start of recording

and two beeps when the recording is stopped

• Disabled

• Enabled

Tone: Level

Set the output level of the reference tone

40 to 0 dBFS in 1 dB steps

Tone: Frequency

Allows the user to set the frequency of the reference

tone oscillator

100–10,000 Hz in 10 Hz steps

Tone: Mode

Select the destination of the reference tone or to

disables it completely

• disabled

• to record tracks only

• to outputs only

• to record tracks and outputs

Tone: Record Lock

Sets the Tone key to be either available or locked while

in Record Mode.

• Enabled While Recording

• Locked While Recording

Drive: Speed Tests

Performs a write/read speed test on the internal hard

drive, CompactFlash, and external drives. Data trans-

fer speed is measured in KB/s.

Caution: Drive test will disable processing and

mute outputs for duration of test. Outputs will not

return until test is exited.

INHDD: Space

Shows the drive file system, total size, and space

remaining on the internal hard drive.

INHDD: Erase / Format

Formats the internal hard drive.
Caution, while various PC utilities are able to recover

files from a re-formatted drive, once formatted old

audio data is not accessible by the 722.

• Empty Trash

• Empty False Takes

• Empty both

INHDD: Empty Trash

Allows user to delete files previously sent to the trash

as well as false takes.

CF: Space

Shows the drive file system, total size, and space

remaining on connected CompactFlash medium.

CF: Erase / Format)

Formats installed CompactFlash medium
Caution, while various PC utilities are able to recover

files from re-formatted drives, once formatted, old

audio data is not accessible by the 722.

CF: Empty Trash

Allows user to delete files previously sent to the trash

as well as false takes.

• Empty Trash

• Empty False Takes

• Empty both

EXHDD: Space

Shows the drive file system, total size, and space

remaining on connected Compact Flash medium.

EXHDD: Erase / Format

Formats attached FireWire storage volume
Caution, while various PC utilities are able to recover

files from re-formatted drives, once formatted, old

audio data is not accessible by the 722.

Summary of Contents for 722

















































































Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands

Sound Devices 722, User Manual

Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands