Sound Devices 722 User Manual Download Page 72

Page: 72 / 80

722 User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Inputs/Outputs – Digital

AES3-id

75 ohm, 0.5 V p-p, S/PDIF compatible with RCA adapter

Digital Storage

Internal hard drive

SATA interface 2.5-in hard drive 4200–7200 RPM supported, FAT32 formatted,

up to 2 TB addressable

serial numbers below 471309092000 use

ATA-5 interface 1.8-in or 2.5-in hard drive 4200–7200 RPM supported, FAT32 formatted,

up to 2 TB addressable

CompactFlash

CF type I, II, and + (microdrive) compatible, FAT32 formatted, up to 2 TB addressable

File Types

WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit

FLAC, (Free Lossless Audio Codec)

MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo

MP2 @ 64, 96, 128, 160, 192, 256, or 320, 384 kb/s stereo

Utilities

format and speed test for internal HD, CF, and external drive volumes

Data Transfer / Control

FireWire

peripheral-mode, IEEE-1394a compliant, 6-pin FireWire, Windows 2000, XP, Vista, Mac OS X only

C . Link

6-wire modular input and output, RS-232 machine control, word clock, time code transfer (744T)

Powering

Internal Voltages

±16 VDC regulated audio rails

5 VDC data

3.3 VDC data

1.5 VDC DSP core

48 VDC phantom power

Power supply (batteries)

operating cell, removable 7.2 V (nominal) Sony M- or L-type Li-ion, operational from 6–8 V

Power supply (external)

10–18 V, 1000 mA minimum, via locking 4-pin Hirose connector, use Hirose #HR10-7P-4P (DigiKey# HR100-

ND) for locking mating DC connector; pin-1 (

), pin-2 (

), pin-3 (+), pin-4 (+). See

Powering

section for

additional details

Environmental

Operation and Storage

Ambient temperature 5–55° C,

Relative humidity (non-condensing) <80%

Other

LCD Display

202 x 32 pixels, extended temperature, backlit display

Tone Oscillator

100 Hz–10 kHz, variable output, assigned to tracks or outputs (menu-selectable)

Quick Setups

Four factory presets, one user setup stored to CF or HD as data file

Dimensions and Weight

Size

45 mm x 209 mm x 125 mm (H x W x D)

1.8” x 8.2” x 4.9”

Mass

unpackaged: 1.2 kg, (2.6 lbs) without battery

Summary of Contents for 722

















































































Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands

Sound Devices 722, User Manual

Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands