Sound Devices 722 User Manual Download Page 56

Page: 56 / 80

722 User Guide and Technical Information

v. 2.67

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Firmware Upgrades

The 722 uses upgradable EEPROM (electrically erasable programmable read-only memory) to hold

the unit’s operating system software, or firmware. Firmware is the source code which controls all

aspects of the device, including: signal routing, signal processing, menu options, LED’s, controls,

and data ports.

Version Information

During manufacturing the unit’s hardware revision number and serial number are burned into a

protected area of the EEPROM. This information is not modifiable. These numbers are viewed in the

Info:Version

selection of the setup menu.

Info:Version

also shows the firmware version of the

recorder.

The current firmware revision number is also displayed on the bottom right-hand corner of the

Sound Devices splash screen at boot up (v2.65+). The 722 firmware version and unit serial numbers

are written to the data chunk of every WAV audio file generated by the 722.

Upgrade Process

From time to time Sound Devices may issue revisions (new versions) of firmware for the 722. Firm-

ware is user-upgradeable. To upgrade firmware follow the steps below.

Download the firmware file from the Sound Devices web site.

Transfer the firmware file (it will be named

version _ number.prg

) to the 722 internal hard drive via

FireWire or onto a CF card. If there are multiple firmware files on the media, the 722 will select the first

firmware file available. There is no provision to skip to the next file. To prevent confusion, ensure that

there is only one firmware file available on any 722 media.

Enter the firmware upgrade menu. You will be prompted to search for the firmware file. If a valid

firmware file is present on either the internal hard drive or CF the recorder will prompt if the path is

the proper file to use. Press the Rotary Switch or the tone key to say yes. The 722 will begin firmware

upgrade and validation. Progress is indicated with a bar graph.

When the upgrade and verify process is complete, power cycle the 722. On power-up the LCD will turn

solid black and the green LED next to the FireWire port will blink 20 times. When the update sequence

is complete, the 722 will reboot once again.

Verify the firmware version using the

Info:Version

menu.

Reset the time-of-day clock to the present time and date.

Firmware upgrades are designed to preserve all user menu settings. As a precaution, we recommend sav-
ing the present state as a setup file on the hard drive or CF. Once a firmware upgrade is complete, restore
settings from this file, if necessary.

Summary of Contents for 722

















































































Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands

Sound Devices 722, User Manual

Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands