Sound Devices 722 User Manual Download Page 57

Page: 57 / 80

722 User Guide and Technical Information

CL-1 Remote Control and Keyboard Interface

The CL-1 Remote Control and Keyboard Interface is an available hardware accessory to interface

with PS/2 compliant computer keyboards and enable external devices to control the 722. When us-

ing the CL-1, front panel controls and menu selections on the 722 can be mapped to keyboard short-

cuts, allowing for full keyboard control of the recorder. Additionally the CL-1 has contact closures for

programming remote inputs or outputs. These are commonly used for machine control and “remote

rolling” using a mixing console with transport controls.

Connecting the CL-1

1. Connect the included C. Link cable to the 722’s C. Link Input connector.

2. Connect the opposite end of the C. Link cable to the CL-1’s C. Link connector.

3. Connect a PS/2 keyboard to the PS/2 connector on the CL-1.

4. Connect switches between assigned pins 1-6, pin-7 (ground), and pin-8 (+5V) on the CL-1. (

See

Logic

Inputs and Outputs

)

The C. Link port on the 722 provides power for CL-1 operation.

Keyboard Assignments

Standard keyboard shortcuts have been pre-assigned and are listed below.

Menu Keys

Shortcut Key

Function

Space Bar

Enters Playback Mode

Pauses take in Playback Mode

Escape

Cancel – Exits without saving in all menus

Enter

Ok – Exits with saving in all menus (Check Mark or Edit)

Up Arrow

Mirrors the LCD Up Arrow in all menus

Down Arrow

Mirrors the LCD Down Arrow in all menus

Left Arrow

Mirrors the LCD RWD Arrow in all menus

Custom Route User Interface – Un-assign Route

Time Menu – Moves to previous field

Right Arrow

Mirrors the LCD FFWD Arrow in all menus

Custom Route User Interface – Assign Route.

InRoute User Interface – Edit if on ‘Custom Route’

File User Interface – Selects Options for Folders/Files when displayed

Shortcut Edit User Interface – Edit shortcut if on shortcut number

Scene/Track Lists – Edits (Same as hitting Play button)

Time Menu – Moves to next field.

CTRL + Up Arrow

Setup User Interface Menu - Moves to the previous category

CTRL + Down Arrow

Setup User Interface Menu - Moves to the next category

Page Up

Setup User Interface Menu - Moves to the previous category or marker

Page Down

Setup User Interface Menu - Moves to the next category or marker

Shortcut Edit User Interface Menu – Same as Enter

Menu

Enters the Setup Menu

Home

Setup User Interface Menu - Moves to the top of the list.

File User Interface – Moves to the top of the list

Shortcut Edit User Interface – Goes to first shortcut number or Hot Key

String User Interface – Goes to the beginning of the string

Summary of Contents for 722

















































































Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands

Sound Devices 722, User Manual

Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands