Sound Devices 722 User Manual Download Page 63

Page: 63 / 80

722 User Guide and Technical Information

Setup Menu

The setup menu controls a wide range of parameters for the 722, including all audio routing and re-

cording settings. The setup menu is a single, flat architecture with no sub-menus, easing navigation.

Each setup controls a specific parameter with several selections. The chart below shows the setup

number, a description of the control, and the menu options available.

Setup Name

Setup Description

Setup Options

Quick Setup

Allows the user to quickly apply default menu setups

and save/retrieve user setups to disk or CF.

• Load Factory Settings

- restores the factory default settings
• Load Film Settings

- applies typical setups for film production
• Load Reporter Settings

- applies typical setups for voice recording
• Load Music Settings

- applies typical setups for music recording
• Load User from INHDD

- applies settings saved by user to hard disk
• Load User from CF

- applies settings saved by user to CF
• Save User to INHDD

- saves present state to file on hard drive
• Save User to CF

- saves present state to file on CF

FireWire: Connection

Activates FireWire drive mode.

• Computer/Connect (STOP+HDD buttons)

• External Drive

Rec: Sample Rate

Sets the audio sampling frequency of the 722

• 32 kHz
• 44.1 kHz
• 47.952 kHz
• 47.952k F
• 48 kHz
• 48.048 kHz
• 48.048k F

• 88.2 kHz
• 96 kHz
• 96.096 kHz
• 96.096 k F
• 176.4 kHz
• 192 kHz

Rec: Bit Depth

Sets the bit depth of the 722 recordings.

• 16 bit,

• 24 bit

Rec: File Type

Selects the file format (type) recorded to the selected

medium.

• .wav poly
• .wav mono
• .flac
• .MP3 32 kb/s
• .MP3 64 kb/s
• .MP3 96 kb/s
• .MP3 128 kb/s
• .MP3 160 kb/s
• .MP3 192 kb/s
• .MP3 256 kb/s

• .MP3 320 kb/s
• .MP2 64 kb/s
• .MP2 96 kb/s
• .MP2 128 kb/s
• .MP2 160 kb/s
• .MP2 192 kb/s
• .MP2 256 kb/s
• .MP2 320 kb/s
• .MP2 384 kb/s

Rec: Media Select

Selects the storage media used for recording. Media is

selectable even if it is not present.

• INHDD Only
• CF Only
• EXHDD Only

• INHDD and CF
• EXHDD and INHDD
• EXHDD and CF
• EXHDD and INHDD and CF

Rec: Scene Name/Number

User-defined, alpha-numeric file scene names can be pre-set
and selected from a list. Scene name lists can be saved to
hard drive.

<up to 9 alpha-numeric characters can be

entered for the scene name>

Scene name can also be left blank

Rec: Track Names

used to identify a track name which shows up in iXML

and BWF metadata

•

Track A

•

Track B

•

Track C

•

Track D

• Mix
• Boom
• <Add New Entry>
• <Load List From INHDD>
• <Save List From INHDD>

Rec: Take Name/Number

Numeric, auto-incrementing number used for take

identification.

<selectable alpha cha integers up to

32000, with or without preceding 0’s>

Summary of Contents for 722

















































































Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands

Sound Devices 722, User Manual

Search results

Summary of Contents for 722

Reviews:

Related manuals for 722

Brands by name

Popular brands