SVP 0/1/2/3-E - Code: 3529.0091.01
Rev. 0
dated 19/06/2001
16-I
PT
601
PP
601
GC
601
Technical Assistance Service
Tel. (+39) 0445.595.111
3
1.
Introduction
1.1
Foreword
1.2
Guarantee: validity and therms
The machine is covered by six months guarantee from the date of delivery
limited to any parts that show manufacturing defects with the exception of
the electrical plant.
The guarantee is not applicable to parts of the machine that have been
damaged during transport, due to poor or incorrect installation or main-
tenance, and due to negligence or unskilled use.
The guarantee holds valid only for the original purchaser of the machine and
shall not envisage the complete replacement of the machine under any
circumstances. The guarantee shall be null and void if the machine has
been tampered with, modified or repaired by personnel who have not been
previously authorised by C.M. SOTTORIVA S.p.A.
The Manufacturer shall not be held liable for possible direct or indirect
damage or injury to animals, persons or property caused by malfunctions of
the machine or any damages resulting from the failure of the machine to
operate. The repair or replacement of defective parts of the machine is
normally carried out on the client’s premises and is therefore subject to
charges for travel, board and accommodation for the personnel sent to carry
out the work. The client will also be charged for travelling time and working
hours of the relative personnel, in accordance with the A.n.i.m.a. (Italian
association of food machinery manufacturers) scale. If, at the final decision
of C.M. SOTTORIVA S.p.A. technical personnel, it is impossible to carry out
the work at the client’s premises, the client is required to ship the machine
carriage paid to C.M. SOTTORIVA S.p.A. and, after having carried out the
repairs and maintenance work free of charge, C.M. SOTTORIVA S.p.A. will
ship the machine to the client carriage forward.
When the foregoing guarantee period has elapsed, repair and maintenance
will be carried out and labour costs (according to A.n.i.m.a. scale) travel,
board and accommodation, the cost of the replacement parts and any
relative transport costs will be borne by the client.
Labour rates in accordance with the A.n.i.m.a. scale will be in the
possession of the technical personnel that perform the work.
For valid guarantee claims, the guarantee certificate (see facsimile below)
must be duly compiled in all its parts and returned within 15 days of the date
of delivery.
Caution!
Before starting the machine read carefully the instructions in this
handbook and adhere strictly to the recommendations contained
herein.
CONSERVE this handbook and all attached documentation in a
place that is accessible and known to all operators and maintenance
personnel; the handbook must be kept in a dry place, preferably in
an envelope to protect it against dust, damp, light, etc.
