1-3 (E)
SRX-R515P
1-3. Required
Equipment/Tools
The equipment and tools required for this system are as follows.
Equipment/tools Description
Projection lens
Prepare the necessary lens(es) in accordance with the installation
environment.
.
LKRL-Z511
.
LKRL-Z514
.
LKRL-Z519
.
LKRL-A502
.
LKRL-A503
n
Regarding the selection of lens, contact your local Sony Sales Office/Service Center.
3D lens filter
LKRA-005 etc.
Lens change table
LKRA-008
For enabling easy replacement of the 2D lens and 3D lens.
n
When installing the lens change table LKRA-008, refer to Section 6.
Lamp
Prepare one of the following lamps in accordance with the installation environment.
.
LKRM-U450 (6 pcs, 450 W)
.
LKRM-U330 (6 pcs, 330 W)
m
.
If all 6 pcs are not inserted, the projector does not operate.
.
Regarding the selection of lamp, contact your local Sony Sales Office/Service
Center.
Pedestal
_
UPS
For the server
Power cable
Need to obtain the cable that matches the plug on the installation site.
Exhaust system
Connect the duct to the duct connecting portion on the rear top panel for exhausting
the heat inside the projector. In the case of using the 8-inch duct, the following exhaust
air volume is required.
The exhaust air volume of 450-550 ft
3
/min (12.7 to 15.6 m
3
/min) should be secured.
External connection cable
Refer to Section 4.
Tool
Screwdriver (for installing the lamp and server)
Carrying handle
Handle arm (part number: 4-164-849-02)
Pipe (short) (part number: 4-164-850-02)
Pipe (long) (part number: 4-164-851-02)
Luminance meter
CL-200 or the equivalent
Colorimeter
PR-650 or the equivalent
Tripod
For the colorimeter and illuminometer
Hexagonal wrench
For the 3D lens adjustment: subtense: 2.5, 3.0, 5.0 mm
For the lens shift adjustment: subtense: 5.0 mm
Spanner
Subtense: 8 mm (supplied with the lens)
Subtense: 24 mm (for flexible leveler)
Subtense: 30 mm (for nut (M20))
USB mouse, USB keyboard For the connection setting with the external equipment such as audio processor and
UPS
