5-38 (E)
SRX-R515P
5-8-11. Calling the Registered Image Information (FUNCTION MEMORY Function)
1. After the adjustment and setting are completed, tap the “Configuration” tab.
2. Tap
[Projector|$3D%]
→
[Set|Function]
.
The Set Function screen is displayed.
3. Select the registered data that you want to call from the Function List pane.
4. Tap
[Load]
.
The confirmation message is displayed.
5. Tap
[OK]
.
5-9. Color Space Conversion (CSC) Adjustment
The color on the screen changes according to the state of screen and auditorium. Therefore, it is required
to perform the adjustment on site.
The CSC adjustment needs to be performed for each Color Space (DCDM, 709). Also, the color changes
depending on the type of lens and with/without the use of 3D filter (3D eyeglasses). Therefore, it is re-
quired to perform the color space conversion respectively. The color on the screen on which multiple
adjustment images are displayed is measured by using the color meter, and then the color space conver-
sion is performed based on the measurement results.
m
.
Perform the CSC adjustment in the state of luminance level that has been set slightly higher than the
level that you want to set. (For example, if you want to set the luminance level to 14ft-L with the 2D
screen, set it to approx. 16ft-L.)
.
In the case of using the 3D lens, perform the adjustment for the lower lens (image for left eye) and
upper lens (image for right eye) respectively.
Hide the image from view on the unadjusted side using the Picture Muting pane.
Required equipment
.
Color meter/luminance meter
.
Tripod
Screen example
[Load]
Function List pane
[Projector|$3D%]
[Set|Function]
