2-2 (E)
SRX-R515P
2-2. Installation of Lens
m
.
When performing the installation/removal of lens, be sure to shut down the system, then turn off the
power switch of the projector.
.
When performing the installation/removal of lens, be careful not to touch the lens board.
m
.
Although the illustration used here for description is the 2D lens, the installation procedure for the 3D
lens is the same as the 2D lens.
.
The projector is provided with the lens change table (LKRA-008) for enabling easy replacement of the
2D lens and 3D lens. For the installation procedure, refer to “Installation of Lens Change Table” in
Section 6.
1. Raise the lens fixing lever toward the “ ” side with the lock button pushed all the way in (lock
released).
n
If you raise the lens fixing lever without pushing the lock button, the lock button and lens fixing lever
will be damaged. Be sure to push the lock button and check that the lock is released before raising the
lever.
Lens fixing lever
Lock button
Board
3D lens
2D lens
Board
