5-63 (E)
SRX-R515P
5-14-10. Turning Off the Lamps Individually
The lamps can be turned off individually when the projector is power-on state (lamps are lit). This func-
tion is used temporarily for the test and so forth.
Even if the projector is made standby state or the lamps are turned off in the state that some lamps have
been turned off, all lamps light up when the next time the power is turned on. (Prevention of forgetting to
turn on the lamps)
1. Tap the “Configuration” tab.
2. Tap
[Projector|$2D%]
or
[Projector|$3D%]
→
[Adjust|Lamp]
.
The Adjust Lamp screen is displayed. (The screen example shows 2D screen.)
3. Tap
[OFF]
of the lamp that you want to turn it off.
If you want to turn on the lamp again, tap
[ON]
of the lamp that was turned off.
Screen example
[Projector|$2D%]
[Adjust|Lamp]
Configuration tab
