5-17 (E)
SRX-R515P
5-7-2. Position Adjustment
Perform the position adjustment using the lens shift block.
1. Project the test pattern. (Refer to steps 1 to 3 in Section 5-7-1.).
2. Loosen the three V shift lock screws and three H shift lock screws.
3. Adjust the image position in the vertical direction by rotating the V shift knob.
4. Adjust the image position in the horizontal direction by rotating the H shift knob.
5. Tighten the three V shift lock screws and three H shift lock screws.
H shift knob
V shift knob
Lens shift
block
H shift lock screws
(3 pcs)
V shift lock screws
(3 pcs)
