130
Operating Instructions
To listen to the messages again
Press
play/stop
.
Playback starts from the first message.
Notes
• If a call comes in, the playback will stop.
• If you listen to the messages from an outside phone, the
illumination of the
message
button will not change.
Tips
• If you press
play/stop
or
message
when there are no new
messages, the machine will announce that no new
messages have been recorded.
Additional tasks when playing back messages
To
Do this
Erase the messages
Press
hold/erase
.
Repeat the current
Press
1
(
.
).
message
Go back to the previous
Press
1
within the
message
first 2 seconds of the
current message
playback.
Skip the current message
Press
3
(
>
).
To adjust the speaker
Press the ringer/handset
volume
speaker volume
or
.
Playing back messages on the
handset
Pick up the handset from the charger,
press
off
and then press
play/call priority
.
You will hear the messages from the handset
speaker.
To stop playback
Press
off
.
Additional tasks when playing back messages
To
Do this
Repeat the current
Press
1
(
.
).
message
Go back to the previous
Press
1
within the
message
first 2 seconds of the
current message
playback.
Skip the current message
Press
3
(
>
).
To adjust the speaker
Press
talk
(vol).
volume
Basic operation
Before you go out
Make sure the date and time are set correctly (see
page 118).
Press
message
on the base phone so that the
button lights up.
When a caller calls
The prerecorded greeting will be played back and
the phone records the caller’s message.
When the memory is full
The total recording time of this answering machine is
approximately 10 minutes including the greeting and
messages or up to 30 messages. When the memory is
full, no more recordings can be made.
Tips
• You can record your own greeting. See page 131.
• You can answer the phone after checking who is calling.
Pick up the receiver or press
talk
on the handset after
you hear the caller’s voice. The recording stops when
you answer the call.
Notes
• If you hear an error beep when you press
message
, the
memory is full. Erase some of the unnecessary messages
before you press
message
again.
• The line is disconnected if the caller does not speak for
more than 7 seconds.
• When the memory becomes full, the greeting will change
to one that asks the caller to call back and no further
recordings can be made.
When you come home
1 Check the
message
button to see if there
are new messages.
If the button is flashing, there are new messages.
If the button stays lit, there are no new messages.
2 To listen to the messages with the
answering machine set to on, press
play/stop
.
The messages will be played back and the time of
recording is announced for each message. The
button remains lit.
To turn the answering machine off and listen to
the messages
Press
message
so that the lamp on the button goes off.
The messages will be played back and the time and
day stamp is announced after each message if you
have set the date and time (page 118).
To stop playback
Press
play/stop
.
B
Answering Machine Features
