124
Operating Instructions
B
Basics
Making calls
On the base phone
Pick up the receiver and if you hear a dial
tone, dial the number using the number
buttons.
When you finish talking
Return the receiver to the base phone.
Notes
• If you use the phone for the first time, a lamp will flash
until you set the date and time.
• If you hear a continuous beep, a handset is in use.
To adjust the volume
During phone conversation, press ringer/handset
speaker volume
or
.
On the handset
1 Pick up the handset from the charger.
If the handset is not on the charger, press
talk
.
2 Dial the number using the number
buttons.
When you finish talking
Return the handset to the charger or press
off
.
Tip
To prolong the battery life, we recommend you return the
handset to the charger after every use.
Note
If you hear a long continuous beep when you press
talk
,
the base phone is in use and you cannot use the handset.
To adjust the volume
During a phone conversation, press
talk
(volume).
Each press on the button switches the volume
between high and low.
Receiving calls
On the base phone
Pick up the receiver when the phone rings.
On the handset
Pick up the handset from the charger when
the phone rings.
If the charger is not on the charger, press
talk
.
When you finish talking
Base phone:
Return the receiver to the base phone.
Handset:
Return the handset to the charger or press
off
.
If you do not answer the phone
After ringing 15 times, a message asking the caller to
call back will be heard.
When you receive another call during a
conversation
Base phone:
Press
flash/program
.
To return to the previous call, press the button
again.
Handset:
Press
flash
.
To return to the previous call, press the button again.
Note
The handset starts ringing after the base phone rings once
or twice. Pick up the handset only after the handset starts
ringing.
To adjust the volume
Base phone:
During a phone conversation, press the
ringer/handset speaker volume
or
.
Handset:
During a phone conversation, press
talk
(volume). Each press on the button switches the
volume between high and low.
Putting a call on hold
While talking via the base phone
1 Press
hold/erase
during a phone
conversation.
The in use indication will flash on the display
and a melody is heard.
2 To resume conversation, press
hold/erase
again.
To resume conversation on the handset after
putting a call on hold on the base phone
Return the receiver to the base phone and pick up
the handset from the charger or press
talk
.
