Getting Started
8
1
Press ON/STANDBY to turn on this player..
2
Press INPUT SELECT 1 (or press VHS INPUT SELECT on the
remote repeatedly until “LINE1” appears).
INPUT SELECT 1 button lights up.
3
Turn on your TV and select a programme position for video
playback.
Choose a channel between UHF 30 and 39 on the TV, where there is
no picture and no sound or only a steady rustling sound.
This channel will now be referred to as the video channel.
4
Tune the TV so that a blue screen appears on the TV screen.
Refer to your TV manual for tuning instructions.
You have now tuned your TV to this player. From now on,
whenever you want to play a tape, set the TV to the video channel.
If the blue screen does not appear clearly, see “To obtain a clear blue
screen” on the next page.
Step 4
Tuning your TV to this player
If you have connected this player to the TV using the audio/video cable,
skip this step.
ON/STANDBY
INPUT SELECT 1
ON/
STANDBY
VHS
INPUT
SELECT
