Basic Operations-VCD part
17
Basic Operations
Additional tasks
To
Stop play
Pause play
Resume play after pause
Go to the next track or scene*
Go back to the preceding track or scene*
Locate a specific track
Locate a specific part of a track or scene
Stop play and remove the CD
Press
p
STOP
P
PAUSE
P
PAUSE or
·
PLAY
+
NEXT
=
PREV
+
NEXT or
=
PREV, number button
of the track
and hold
)
or
0
down, or
#
(Locked
search)
§
OPEN/CLOSE
* VIDEO CDs with PBC functions (Ver 2.0) only
Sound effect
You can use the surround sound effect. To activate the surround function,
set the SOUND EFFECTOR switch to NORMAL.
To give a monaural source the effect of a stereo sound, set the SOUND
EFFECTOR switch to STEREO. The STEREO function also works for
monaural sound from LINE INPUT.
To cancel the surround sound effect
Set the SOUND EFFECTOR switch to OFF.
Tips
• When “RESUME” appears in the display window, you can resume playback from
the point where you stopped the VIDEO CD.
• Automatic pause function works according to the signal encoded on the disc during
VIDEO CD playback. If the player doesn’t resume play for a long time, press
∏
or
·
to resume play manually.
• A track is a section of a picture or a music piece on a disc. Each track is assigned
track number to enable you to locate the track you want.
• To change the output signal to LINE OUT to the VCD signal manually, press
OUTPUT SELECT VCD.
Notes
• When playing a VIDEO CD with PBC functions, in Step 4, the menu screen appears
on the TV screen. You can play the VIDEO CD interactively, following the
instructions on the menu screen.
• You need to press the OUTPUT SELECT VCD button to select the VCD part before
playing when OUTPUT SEL is set to NORMAL under SET UP MENU in the menu
system.
continued