63
Additional Information
Recor
ding
Others
Symptom
The picture rolls vertically
during picture search.
The picture has no sound
The sound is unstable or has an
echo.
The sound loses stereo effect.
The player doesn't play from
the first track when playing a
VIDEO CD without PBC
functions or an audio CD.
The tape starts playing as soon
as it is inserted.
The tape is ejected when you
press
r
REC.
Nothing happens when you
press
r
REC.
No tape can be inserted.
The remote commander does
not function.
The tracking indicator does not
appear on the screen.
The player needs to be cleaned.
The AMS function does not
work properly in the
KARAOKE mode.
The sound from the
microphone does not go out in
the KARAOKE mode.
Remedy
• Adjust the vertical hold control on the TV or monitor.
• The tape is defective. Use a new tape.
• Check that the player is connected securely.
• Make sure you operate the TV or the amplifier
correctly.
• Make sure you select the correct position on the
amplifier.
• When you play a tape with the same sound recorded
on both the hi-fi and normal sound tracks, make sure
the AUDIO MIX option in SET UP VHS is set to OFF.
• “R ch” or “L ch” appears in the display window .
• Press CONTINUE. “CONTINUE” appears in the
display window, then press
·
.
• The safety tab of the video tape has been removed. To
record on this tape, cover the tab hole.
• Check that the safety tab of the video tape has not been
removed.
• Make sure the tape is not at its end.
• Select the correct source with the INPUT SELECT
buttons.
• Check that a tape isn’t already in the tape
compartment of the VHS part.
• Make sure you are pointing the remote commander at
the remote sensor on the player.
• Remove the obstacles in the path of the remote and the
player.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the TV / VCD/VHS remote control switch
is set correctly.
• The recording condition of the tape is very poor and
tracking cannot be adjusted in the VHS part, or the
NTSC system is being used.
• Clean the cabinet, panel, and controls with a dry soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.
• The tape has too many blank spaces in a short time
span.
• When the player is in stop mode, the sound from the
microphone may not go out. To hear the sound in stop
mode, press INPUT SELECT 2 (page22).
Playback