manualshive.com logo in svg

Sony SLV-7000KCH, Operating Instructions Manual, Page: 6 / 72

Share
Download
Sony SLV-7000KCH Operating Instructions Manual Download Page 6

Getting Started

5

Getting Started

Remote sensor

TV / VCD/VHS

Step 2

Setting up the remote commander

Inserting the batteries

Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.

Using the remote
commander

You can use this remote
commander to operate this
player and a Sony TV.  Buttons
on the remote commander
marked with a dot (•) can be
used to operate your Sony TV.

To operate

VCD/VHS

a Sony TV

Set  TV / VCD/VHS to

VCD/VHS  and point at the remote sensor on this player

TV  and point at the remote sensor on the TV

Notes

• The TV/VIDEO button selects an input source of the TV from aerial in or line in.

The button does not control this player.

• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove

the batteries to avoid possible damage from battery leakage.

• Do not use a new battery with an old one.
• Do not use different types of batteries.

Summary of Contents for SLV-7000KCH









































































Reviews:

No comments