4.Operation
SONY AIT-3 drive SDX-700 series Ver.2.1
4-1
4. Operation
4.1.
Summary of LED indications
The SDX-700C have 3 LEDs. Each LED shows "Tape Motion", "Cleaning Request", and "Replace Tape" as defined.
"Tape Motion" to show the tape motion in the drive.
"Cleaning Request" to be on, when CLEANING is required.
"Replace Tape" to be on, when the tape needs to be replaced. It should be on when a medium error occurred.
All of three LEDs flash fast simultaneously, when the drive is in malfunction.
The following table shows the meaning of each LED indications:
Table 4-1: Meaning of each LED indications
LED
Tape Motion
Cleaning Request
Replace Tape
Off
No Tape
Cleaning is Not Necessary No Media Error Occurred
On
Tape Loaded
Cleaning Request
Media Error Occurred
Flash Slowly
Tape Access in Progress
(Write/Read)
Cleaning is Not Completed Media Warning
Flash Fast
Tape Access in Progress
(Others)
All LED Flash Fast
H/w Error Occurred
Flash Fast
(0.3sec on/ 0.3sec off)
0.3
sec
Flash Slowly
(0.9sec on/ 0.3sec off)
0.9sec
0.3sec
Summary of Contents for SDX-700C
