Sony SDX-700C, Product Specifications Manual, Page: 135 / 221

REPORT DENSITY SUPPORT 6.Command Specification
SONY AIT-3 drive SDX-700 series Ver.2.1 6-85
11 (LSB)
12 (MSB)
15
CAPACITY
(LSB)
16 (MSB)
23
ASSIGNING ORGANIZATION ( SONY )
(LSB)
24 (MSB)
31
DENSITY NAME ( AIT-1 )
(LSB)
32 (MSB)
51
DESCRIPTION ( Advanced Intelligent Tape 1 )
(LSB)
52 PRIMARY DENSITY CODE ( 31 h )
53 SECONDARY DENSITY CODE ( 30 h)
54
WRTOK(1)
DUP(0) DEFLT(1) Reserved (00h)
55 Reserved (00h)
56 Reserved (00h)
57 (MSB)
59
BITS PER MM ( 00 19 AF h )
(LSB)
60 (MSB)
61
MEDIA WIDTH (00 50 h)
(LSB)
62 (MSB) TRACKS ( 00 01 h )
63 (LSB)
64 (MSB)
67
CAPACITY
(LSB)
68 (MSB)
75
ASSIGNING ORGANIZATION ( SONY )
(LSB)
76 (MSB)
83
DENSITY NAME ( AIT-2 )
(LSB)
84 (MSB)
103
DESCRIPTION ( Advanced Intelligent Tape 2 )
(LSB)
104 PROMARY DENSITY CODE (32h)
105 SECONDARY DENSITY CODE (30h)
106
WRTOK(1)
DUP(0) DEFLT(1) Reserved (00h)
107 Reserved (00h)
108 Reserved (00h)
109 (MSB) BITS PER MM (0017D6h) (LSB)
111
112 (MSB) MEDIA WIDTH (00 50h) (LSB)
113
114 (MSB) TRACKS (00 01h) (LSB)
115
116 (MSB) CAPACITY (LSB)
119
120 (MSB)
127
ASSIGNING ORGANIZATION (SONY)
(LSB)
128 (MSB)
135
DENSITY NAME (AIT-3)
(LSB)
136 (MSB)
155
DESCRIPTION (Advanced Intelligent Tape 3)
(LSB)
Density support data blocks shall be returned by ascending primary density code values.
Primary Density Code : This field contains the value returned by a Mode Sense command for the density described
in the remainder of the density support block. The drive shall accept a Mode Select command containing this value,
for appropriate media. The value of 00h shall only be used for the default of the logical unit.